Flag Hit S - Graphic (Double-Sided)

  • Dye-sublimated fabric graphic for Flag Hit S. Double-sided printing on opaque fabric.

  • Total Graphic Area: 27.95"w x 63"h (each side)
    Shipping Weight: 0.5 lbs.


    Handling & Care: 
    Dye-sublimated fabric graphics are easy to maintain and clean. Whenever possible, roll rather than fold graphics to reduce the possibility of creasing. Use a commercial or hand steamer to eliminate creases & wrinkles. Do not iron.

    Spot Cleaning: Fabric graphics can be spot treated as with typical laundry. Use a mild detergent with cold water. Test on a small less obvious spot before attempting treatment.

    Machine Washing: Fabric graphics can be machine washed in cold water on a gentle cycle. Lay flat or hang to dry.


Collections: Flags

Category: Double-Sided, Graphics Only

Type: Flags


Flag Features:

Vibrant and long-lasting dye-sublimation fabric printing
Offers exceptional image quality, colour saturation and exceptional resistance to UV rays. Pole sleeves sewn into flag graphics make changing out your image easy.

Base options with integrated rotating axle
A smooth rotating ball bearing axle helps withstand strong wind gusts effectively increasing the durability and life span of the flag graphic.

Durable fibreglass flag pole hardware
High-resistance e-glass tubes connected with elastic shock cords are quick and simple to assemble.


Hardware Configurations:

Flags are available in the following hardware sizes & configurations:


Flag Graphics:

All flag sizes and styles are offered with both single-sided or double-sided dye-sublimation fabric printing options.

Single-sided mesh fabric
Single-sided graphics are printed on one side of a lightweight mesh fabric that allows your image to bleed through so that it can be seen on both the front and back of the flag display. As a result, the printed graphics when viewed from the backside will appear reversed.

Double-sided opaque fabric
Double-sided graphics are printed on both sides of a tightly knit polyester fabric that features an integrated block-out layer. This allows for different images to be printed on the front and back of the flag display or the same image printed without the reversed appearance when viewed from the back side.


Base Options:

Customize your flag with a supporting base solution that best suits your application.

Weighted Base Plate
Suitable for both outdoor and indoor display, black powder-coated steel base plates are compatible with any ground surface making them the most flexible flag base option. Offered in three different weights to support each flag size, all base plates include a smart rotating ball bearing axle to help withstand strong wind gusts thus increasing the durability and lengthening the life of the flag graphic against the most severe wind conditions.

Indoor Cross Base
Chrome-plated cross base recommended for indoor use. Folds together for compact storage and transport and features an integrated rotating ball bearing axle for mounting the flag pole hardware.

Water Ballast
An optional ballast capable of storing up to 10 litres of water is offered for both the base plate and cross base options. Add a ballast to increase the overall support weight of your flag display.

Ground Spike
Heavy duty steel lawn stake with integrated rotating ball bearing axle for mounting the flag pole hardware.




Related Items